EvoDevice ALSPD2ULTRA · Smart Type 2 Whole-House SPD

ALSPD2ULTRA Smart Whole House Surge Protector with WiFi Failure Alerts

Know when your surge protection needs attention, even when you are away. A typical panel-mounted surge protector relies on LEDs at the electrical panel. ALSPD2ULTRA adds Tuya Smart monitoring, so you can see when a protection element is reporting a fault from your phone, subject to Wi-Fi and notification settings.

Price $88.80 USD Reference price as of November 8, 2026 · Final price may vary.

Select Buy Now to view current price and purchasing details. Checkout, shipping and returns are handled by the sales platform.

108,000 AMax surge-current capacity
2,820 JTotal energy rating
120/240 V60 Hz residential systems
2.4 GHz Wi-FiTuya Smart monitoring
EvoDevice ALSPD2ULTRA mounted-style product beside smartphone showing one protection indicator off and a yellow warning
Protection status you can check from your phone.Normal · Warning · Protection Lost
A qualified or licensed electrician must perform breaker-panel installation. Indoor use only. Follow the supplied instructions and local electrical codes.

What is ALSPD2ULTRA?

A Type 2 whole-house SPD with remote protection-failure awareness

EvoDevice ALSPD2ULTRA is a panel-connected surge protective device designed for 120/240 VAC, 60 Hz residential electrical systems. It combines 108,000 A maximum surge-current capacity and 2,820 J total energy rating with two physical status indicators, a front AC-voltage/surge-count display, and Wi-Fi-connected protection-status monitoring through Tuya Smart.

Phone-visible protection faults

Check the device's protection-element status remotely when connected to Tuya Smart. See a partial failure or loss of protection without repeatedly visiting the electrical panel.

Optional mobile notifications

With a working 2.4 GHz Wi-Fi connection and phone notifications enabled, Tuya Smart can alert you when the reported SPD protection status changes.

Voltage and surge-event count

Short-press SET to switch the local display between AC voltage and the number of recorded qualifying surge events; review counter information in the app.

The main difference

Your SPD is at home. You may be at work. Your phone can show when protection fails.

ALSPD2ULTRA reports the state of its surge-protection elements through two local indicators and the connected Tuya Smart interface. When one indicator stops illuminating, protection is no longer complete. When both are off, the device reports loss of protection.

  • Both green: normal protection status.
  • One green, one off: warning / partial protection failure.
  • Both off: failed / protection lost; inspection and replacement required if the elements have failed.

Device availability and alert delivery depend on power, network connection and notification permissions. Do not rely on app alerts as the sole electrical safety measure.

Normal · Warning · Failed

Three clear protection-status states, locally and on your phone

Protection-status monitoring is different from counting surges. These states describe the condition of the SPD's protection elements, not the number of transient events recorded.

Normal

Both indicators on

Protection elements report normal status.

Warning

One indicator off

One protection leg has failed; the SPD no longer provides full protection. Inspect and replace as directed.

Protection Lost

Both indicators off

Protection is lost. A qualified electrician should check the supply and replace a failed unit.

Important: The ALSPD2ULTRA protection elements are not user-repairable. The manual directs replacement if either status indicator remains OFF after the prescribed power and connection checks. The SET button or an app counter reset does not restore failed protection.

2.4 GHz Wi-Fi · Tuya Smart

Connect the SPD, then review its status without standing at the breaker panel

With the SPD online through a compatible 2.4 GHz Wi-Fi network, the Tuya Smart app provides remote status information, the displayed voltage and surge-event data. Phone notifications can draw attention to reported protection faults when configured and enabled.

  • Smartphone viewing of the protection-element status
  • App notifications for protection-status changes when enabled
  • Local and app views of voltage and recorded surge events
  • No claim that every electrical transient will trigger an immediate push notification

The app's connectivity function does not replace the electrical protection circuitry. The SPD is not a Wi-Fi router or a remote circuit breaker.

Power-event visibility

Read AC voltage or the surge count from the same front display

A short press of SET alternates the local display between measured AC voltage and the recorded surge-event count. The published counter records qualifying events above 600 V and stores up to 999 events.

  • Front-panel AC voltage readout, such as 120 V
  • Dedicated surge-count view, such as 20 events
  • Counter information also available in Tuya Smart
  • Counter reset is a log operation, not a repair of protection elements
AC voltage>600 V recorded eventsUp to 999 eventsShort-press SET

Published surge specifications

108,000 A maximum surge-current capacity. Type 2 protection for 120/240 V systems.

ALSPD2ULTRA is rated for Type 2 panel-level surge protection. Surge current, energy, nominal discharge current and voltage protection ratings describe different performance characteristics; none alone guarantees the performance of an entire home electrical system.

  • 108,000 A maximum surge-current capacity
  • 2,820 J total energy rating
  • 20 kA In nominal discharge current
  • 22 kA SCCR short-circuit current rating
  • VPR: 600 V L-N; 1000 V L-L; 800 V N-G; 600 V L-G

Construction and installation details

Layered housing, silicone sealing pads and 14 AWG leads

The aluminum-over-plastic enclosure combines aluminum outer components with an insulating layer and inner plastic housing. The supplied diagrams also illustrate silicone pad locations and approximately 19.3-inch connection leads. Indoor use only: silicone pads should not be interpreted as proof of an outdoor or waterproof rating.

Correct installation matters

Designed for 120/240 VAC, 60 Hz residential breaker panels

ALSPD2ULTRA is an externally mounted, panel-connected Type 2 SPD. Positioning and wiring must follow the installation instructions, equipment labeling and applicable electrical codes. A dedicated two-pole 50 A circuit breaker is specified for the full published ratings.

Outside the enclosure

The SPD body is mounted beside or on a compatible panel enclosure—not inserted into the breaker spaces like a breaker.

Qualified electrician

Breaker-panel work involves potentially lethal voltage. Installation, inspection and replacement are jobs for a licensed or qualified electrician.

Indoor use only

Keep the unit dry. Do not assume that silicone pads or aluminum housing make the SPD rated for rain or outdoor mounting.

For the published ratings: use the breaker specified in the supplied ALSPD2ULTRA instructions. Lead routing and lengths can affect surge-protection performance. This webpage is a product overview, not a wiring or installation manual.

Official product video

Watch ALSPD2ULTRA status monitoring in a real-home scenario

The video shows the device installed by a residential panel, a protection fault while a homeowner is away, the Tuya Smart phone warning and replacement of a failed SPD by a qualified electrician.

Watch the ALSPD2ULTRA video on YouTube ↗

Key specifications

ALSPD2ULTRA specifications at a glance

These published specifications help homeowners and electricians evaluate panel compatibility and monitoring features. Final installation must follow the supplied instructions and device labeling.

ALSPD2ULTRA electrical, monitoring and housing specifications
Product modelALSPD2ULTRA
Product categoryType 2 whole-house surge protective device (SPD)
Electrical system120/240 VAC, 60 Hz
InstallationPanel-connected; qualified electrician required
Dedicated breaker2-pole 50 A for published ratings
Maximum surge current capacity108,000 A
Total energy rating2,820 joules
Nominal discharge current (In)20 kA
Short-circuit current rating (SCCR)22 kA
Maximum continuous operating voltage (MCOV)150 V L-N; 300 V L-L
Voltage protection rating (VPR)600 V L-N; 1000 V L-L; 800 V N-G; 600 V L-G
MonitoringTwo local green protection-status indicators; Tuya Smart app
Wireless connectivity2.4 GHz Wi-Fi only
Local displayAC voltage and surge count; switch by short-pressing SET
Surge event recordingAbove 600 V; up to 999 events
Lead wiresApprox. 19.3 in; 14 AWG
HousingAluminum outer shell and base with insulating layer and inner plastic housing
Intended environmentIndoor use only; keep dry

Surge current capacity and nominal discharge current are not continuous load-current ratings. 50 A describes the specified dedicated breaker arrangement, not a household appliance load.


Frequently asked questions

What homeowners and electricians ask about ALSPD2ULTRA

Direct, product-specific answers help explain surge protection, remote failure warnings, event counts and installation requirements.

What is EvoDevice ALSPD2ULTRA?

ALSPD2ULTRA is a Wi-Fi-connected Type 2 whole-house surge protective device (SPD) for 120/240 VAC, 60 Hz residential electrical systems. It combines panel-level surge protection with local voltage and surge-count display plus Tuya Smart protection-status monitoring.

How can I know if ALSPD2ULTRA has lost surge protection?

Two physical green indicators report protection-element status. When both are lit, status is normal. If one turns off, that protection leg is no longer intact and the unit no longer provides full protection. If both are off, protection is lost. When connected, the Tuya Smart app also shows the fault and can send notifications when enabled.

What does a Warning or Partially Failed status mean?

One physical protection indicator is off while the other remains lit. The SPD no longer provides full protection. Have a qualified electrician check power and connections, and follow the product instructions: if the indicator remains off, the non-repairable SPD must be replaced.

What does Failed or Protection Lost mean?

Both protection indicators are off. After a qualified electrician checks supply power and wiring, a unit with failed protection elements must be replaced. Do not treat a cleared surge counter or Wi-Fi reset as restored protection.

Will the app notify me while I am away from home?

With the SPD connected to a working 2.4 GHz Wi-Fi network and Tuya Smart notifications enabled, its protection status can be viewed remotely and the app can alert you when its reported status changes. Alert delivery depends on power, network and phone notification settings.

Are surge-event alerts the same as a protection-failure alert?

No. The surge counter records qualifying events above 600 V, up to 999 events. A protection-failure warning reports the state of the SPD protection elements. An event count does not by itself mean the SPD has failed.

How do I switch between AC voltage and surge count?

Short-press the physical SET button to switch between the AC-voltage display and the recorded surge-event count. A long press is used for Wi-Fi pairing reset, not for repairing protection elements.

What happens when the surge counter reaches 999?

The published counter capacity is up to 999 qualifying events. The event count can be reset in the connected app. Resetting the count does not restore or change the SPD protection elements.

Does ALSPD2ULTRA support 5 GHz Wi-Fi?

No. For Tuya Smart connectivity it supports 2.4 GHz Wi-Fi only. 5 GHz-only networks are not supported.

What electrical system and breaker does it require?

It is specified for 120/240 VAC, 60 Hz residential systems. The published ratings specify a dedicated two-pole 50 A circuit breaker. A qualified electrician must assess compatibility and follow the supplied product instructions and local electrical code.

Can I install the SPD outdoors?

No. The supplied ALSPD2ULTRA instructions say indoor use only and to keep the SPD dry. Illustrated silicone pads are not an outdoor-use or waterproof rating.

Does a whole-house SPD prevent all lightning or electrical damage?

No. A Type 2 SPD is designed to help limit transient overvoltage under specified conditions. It is not a guarantee against direct lightning strikes, sustained overvoltage, wiring faults or damage to every connected appliance.

Does ALSPD2ULTRA replace plug-in surge strips?

Not necessarily. Panel-level surge protection and appropriate point-of-use protection can play complementary roles. Follow equipment-specific recommendations for sensitive electronics.

Where can I watch the ALSPD2ULTRA video?

The official product video is available on the EvoDevice YouTube channel and embedded on this page. It demonstrates the product display, protection-status changes and Tuya Smart phone monitoring.

Related education

Whole-House Surge Protection Guide

Understand the difference between surge-current ratings, joules, VPR, protection-element status and app-connected monitoring. Learn why no single rating guarantees immunity against every power disturbance.

Read the Guide

Know when your surge protection needs attention — even when you're away.

ALSPD2ULTRA combines Type 2 whole-house surge protection with dual local indicators, Tuya Smart Wi-Fi fault visibility, an AC-voltage display and up to 999 recorded surge events.

$88.80 USDReference price · Please confirm current price at checkout.
Buy Now

Complete your purchase through the linked sales platform. Price and availability may change.

ALSPD2ULTRA · Smart Type 2 SPDBuy Now · $88.80 →